COPYCOLOUR PRINTING INK

For colouring of anodised photo aluminium with open pores

CopyColour printing ink provides a deep colouration of CopyPhot anodised photo aluminium. This printing ink for manual colouring of the base plates is available in 10 basic colours and 13 mixing colours.

Ink specifications

Interchangeable colours
Colours can be lightened with CopyThinner
Shake well before use
Shelf life: Shelf life: 2 years, if stored in the dark at a temperature between 15˚C - 25˚C

Chemicals

CopyThinner

Solvent to lighten CopyColour printing ink. Up to 2 years, if properly sealed.

CopyClean

Solvent to clean printed and sealed CopyPhot plates. Shelf life: 2 years, if properly sealed.

CopyStrip Liquid

Liquid for removing (stripping) cured photo-emulsion on the base plate. Up to 2 years, if properly sealed.

CopyStrip Liquid Concentrated

Concentrated Copystrip liquid. Concentrated Copystrip liquid. Must be diluted with cold to lukewarm tap water in a ratio of 1: 4. Unlimited shelf-life.

CopyPhot Retouching Lacquer

Correction emulsion to cover small pinholes in the exposed and hardened emulsion prior to colouring the plate. Can be kept for up to 1 year.

Sealing Salt

Liquid that serves as a buffer to the acidity of the seal water. Add to the ratio: 3 gr / litre of seal water. Shelf life: 1 year.

Photo-emulsion

CopyLon photo-emulsion

Photo emulsion to make CopyPhot and DuraSeal base plates light sensitive (again) so that images can be processed with the help of lithographic films. CopyLon can be applied using the Foduktor Rollercoater.

CopyLon consists of emulsion and diazzo salt or Sensitizer. Shelf life is 1 year. Prepared Copylon can be stored for 2 weeks in a dark cupboard and 3 weeks in the refrigerator.

CopyLon Sensitizer

Diazzo salt to make the photo emulsion light-sensitive. Store in a dark place. Can be stored for up to 1 year, if stored in the dark.